 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D AT A SHEET CRYSTAL CONTROLLED OSCILLATORS CW 0629 EE94-543G5 155.52M SURFACE MOUNT 3.3V LVPECL CLOCK ABSOLUTE M AXIMUM RATING S PARAMETER Storage Temperature Supply Voltage (Vcc) UNITS MINIMUM -55 -0.5 NOMINAL MAXIMUM 125 7.0 UNITS C Vdc TABLE 2.0 * Added pin connection option number. See table 8 (Fo) 13 167 -25 25 * Added pin connection option number. See table 8 (Fo) 13 200 -50 50 * Added pin connection option number. See table 8 (Fo) 13 200 -100 100 * Added pin connection option number. See table 8 (Fo) 13 167 -20 20 MHz ppm TABLE 1.0 NOTE EE94-51xG5-Series EE94-52xG5-Series EE94-53xG5-Series EE94-54xG5-Series DESCRIPTION MODEL SPECIFICATIONS : MODEL EE94-51*G5 Center Frequency Total Frequency Tolerance 1 MODEL EE94-52*G5 Center Frequency Total Frequency Tolerance MHz ppm 1 MODEL EE94-53*G5 Center Frequency Total Frequency Tolerance MHz ppm 1 MODEL EE94-54*G5 Center Frequency Total Frequency Tolerance MHz ppm The Connor Winfield EE945xxG5-series is a fixed frequency 10 pad surface mount Crystal Controlled Oscillator (XO) designed for applications requiring low jitter and tight frequency stability. Operating at 3.3V supply voltage, the EE945xxG5-series provides option for LVPECL differential outputs and/or an enable / disable function. FEATURES 1 TABLE 3.0 OPERATING SPECIFIC ATIONS PARAMETER Operating Temperature Range Supply Voltage Supply Current Jitter (BW=10Hz to 20MHz) Jitter (BW=12kHz to 20MHz) SSB Phase Noise at 100Hz offset SSB Phase Noise at 1KHz offset SSB Phase Noise at 10KHz offset SSB Phase Noise at 100KHz offset (Vcc) (Icc) MINIMUM 0 3.135 NOMINAL 3.3 -60 -100 -130 -140 MAXIMUM 70 3.465 60 5 1 UNITS C Vdc mA pS RMS pS RMS dBc/Hz dBc/Hz dBc/Hz dBc/Hz NOTE 3.3V OPERATION OVERALL FREQUENCY TOLERANCE: EE94-51xG5 - 25PPM EE94-52xG5 - 50PPM EE94-53xG5 - 100PPM EE94-54xG5 - 20PPM TEMPERATURE RANGE: 0 to 70C LVPECL DIFFERENTIAL OUTPUTS ENABLE/DISABLE FUNCTION ENABLE / DISABLE INPUT CHARACTERISTICS Disable Input Voltage (High) Enable Input Voltage (Low) (Vih) (Vil) 2.275 - - 1.68 Vdc Vdc 2 2 TABLE 4.0 LOW JITTER <1pS RMS SURFACE MOUNT PACKAGE TAPE AND REEL PACKAGING RoHS 5/6 COMPLIANT LVPECL OUTPUT CHARACTERISTICS PARAMETER LOAD Voltage (High) (Low) Duty Cycle Rise / Fall Time 20% to 80% MINIMUM 2.275 45 NOMINAL 50 MAXIMUM 50 1.68 55 1 UNITS Ohms Vdc Vdc % ns NOTE 3 (Voh) (Vol) 4 ORDERING INFORMATION TABLE 5.0 PACKAG E CHARACTERISTICS Package Hermetically sealed, leadless ceramic package. EE94-543G5 - 155.52MHz LVPECL CLOCK SERIES CENTER FREQUENCY PROCESS RECOMMENDATIONS Soldering Process See solder profile page 2. TABLE 6.0 Specifications subject to change without notice. DATA SHEET #: Ec230 PAGE 1 OF 2 REV: 01 DATE: 07/27/06 aCopyright 2001 Connor-Winfield all rights reserved. THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D AT A SHEET CRYSTAL CONTROLLED OSCILLATORS Notes 1) Inclusive of calibration tolerance @ 25C, frequency vs. temperature, frequency vs. change in supply voltage, frequency vs. load variations, shock and vibration and 10 years aging. 2) When the oscillator is disabled, the true output is in a low state (Vol) and the complementary output is in the high state (VoH). 3) Output must be terminated into 50 ohms to Vcc - 2V or Thevenin equivalent. 4) Duty Cycle measured at 1.977V Output Waveform Pin Connections Pin 1 2 3 4 5 6 7 8 9 10 TABLE 7.0 Connection N/C Option Pin N/C Ground (Vee) N/C Option Pin Q Output N/C + Supply (Vcc) N/C Options Chart (Replace the x with an option number) TABLE 8.0 Option Number 0 1 2 Option Description: Pin 2 and Pin 6: No Connection Pin 6 Complementary Output, Pin 2 No Connection Pin 2 Enable / Disable Function, Pin 6 No Connection (Note: When oscillator is disabled the output, pin 7 is in a high state (Voh). Pin 2 Complementary Output, Pin 6 No Connection Pin 2 Enable / Disable Function, Pin 6 Complementary Output (Note: When oscillator is disabled the output pin 7 is in a high state (Voh) and pin 6 is in a low state(Vol). "1" LEVEL "0" LEVEL 3 4 Dimensional Tolerance: .005" (.127mm) Package Outline Suggested Pad Layout CW 0629 EE94-543G5 155.52M Test Circuit Solder Profile Ramp-Up Rate Temperature 3C/second max. from 150C to 225C. 225C 225C tp Ramp-Down Rate 6C/second max. Q 183C 150C 100C Q Option Pin 25C 0 60-120s Max. 360 Sec. Max. 10-30s 60-150s Max. Time Specifications subject to change without notice. DATA SHEET #: Ec230 PAGE 2 OF 2 REV: 01 DATE: 07/27/06 aCopyright 2001 Connor-Winfield all rights reserved. |
Price & Availability of EE94-513G5-15552
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |